Specs

iRig Pro Quattro I/O Specifications

Microphone Inputs 1-2

  • 2 x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
  • Input impedance: 1 kOhms
  • Input level, min gain: 0 dBFS is obtained with a -1.5 dBu signal at the XLR input
  • Input level, max gain: 0 dBFS is obtained with a -55 dBu signal at the XLR input
  • Frequency response: from 10 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
  • Dynamic Range: 103 dB(A), min gain
  • Phantom power: 48V / -4V

Built-in microphone

  • Type: MEMS
  • Polar pattern: omnidirectional
  • Frequency response: from 30 Hz to 20 kHz
  • Max SPL: 110 dBSPL
  • Sensitivity: -41.5 dB (1 kHz, 94dB SPL)

Instrument Inputs 1-2

  • 2 x unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
  • Input impedance: 1 MOhms
  • Input level, min gain: 0 dBFS is obtained with a +10 dBu signal at the TS input
  • Input level, max gain: 0 dBFS is obtained with a -43 dBu signal at the TS input
  • Frequency response: from 7 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
  • Dynamic range: 103 dB(A), min gain

Microphone Inputs 3-4

  • 2 x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
  • Input impedance: 1 kOhms
  • Input level, min gain: 0 dBFS is obtained with a -3 dBu signal at the XLR input
  • Input level, max gain: 0 dBFS is obtained with a -54 dBu signal at the XLR input
  • Frequency response: from 10 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
  • Dynamic range: 101 dB(A), min gain
  • Phantom power: 48V / -4V

Line Inputs 3-4 (balanced)

  • 2 x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
  • Input impedance: 1 kOhms
  • Input level, min gain: 0 dBFS is obtained with a -3 dBu signal at the XLR input
  • Input level, max gain: 0 dBFS is obtained with a -54 dBu signal at the XLR input
  • Frequency response: from 10 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
  • Dynamic range: 101 dB(A), min gain
  • Phantom power: 48V / -4V

Line Inputs 3-4 (unbalanced)

  • Unbalanced, TRS 3.5 mm stereo Jack and RCA
  • Input impedance: 2.1 kOhms
  • Nominal input level: -3.5 dBV (-10 dBV with 6.5 dB of headroom)
  • Frequency response: from 16 Hz to 46 kHz within 3 dB (96 kHz sample rate)
  • Dynamic range: 93 dB(A)

Line Outputs (balanced)

  • 2 x balanced, 3-pin XLR, Pin 2: hot / Pin 3: cold / Pin 1: ground
  • Floating balanced outputs with automatic level compensation when working in unbalanced mode
  • Output impedance: 150 Ohms balanced
  • Output level: 0 dBFS corresponds to +12 dBu
  • Frequency response: from 5 Hz to 44 kHz within 3 dB (96 kHz sample rate)
  • Dynamic range: 100 dB(A)
  • Channels crosstalk: 88 dB(A)

Stereo Output (unbalanced)

  • Unbalanced, TRS 3.5 mm stereo Jack
  • Output impedance: 150 Ohms balanced
  • Output level: 0 dBFS corresponds to +12 dBu
  • Frequency response: from 5 Hz to 44 kHz within 3 dB (96 kHz sample rate)
  • Dynamic range: 100 dB(A)
  • Channels crosstalk: 88 dB(A)

Headphones Output

  • TRS 3.5 mm stereo Jack
  • Output impedance: 22 Ohm
  • Output level: 26 mW/channel (32 Ohm load)
  • Frequency response: from 15 Hz to 44 kHz within 3 dB (96 kHz sample rate)
  • Dynamic range: 100 dB(A)

Common

  • AD and DA Resolution: 24-bit
  • Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
  • Power: USB bus power, battery power (4 x AA), DC power supply (9VDC) or external USB power supply (5VDC, 1A min)
  • Device Connection: Mini-DIN
  • Size: 166 mm / 6.54″ x 92 mm / 3.62″ x 43 mm / 1.69″
  • Weight: 325 g / 0.72 lb (batteries excluded)
  • Battery Life:
    • Recording - Max load*: 1 hours, 30 minutes (Alkaline); 3 hours (NiMH rechargeable)
    • Playback - Min load**: 2 hours, 30 minutes (Alkaline); 4 hours (NiMH rechargeable)

*Max load condition: four inputs connected each to a 1.6mA phantom powered load, input gains set to maximum, 32 Ohm headphones connected.
**Min load condition is as follows: music playing, phantom power OFF, 32 Ohm headphones connected.

Dimensions

  • Size: 166 mm / 6.54″ x 92 mm / 3.62″ x 43 mm / 1.69″
  • Weight: 325 g / 0.72 lb (batteries excluded)

iRig Mic XY***

  • Type: Electret condenser
  • Polar pattern: Cardioid
  • Capsule size: 0.55”
  • Frequency response: 20 Hz - 20kHz
  • Sensitivity: -39 dB at 1kHz
  • Equivalent noise: 22 dB (A-weighted)
  • Max SPL: 145 dB SPL (@1% THD)
  • Connector type: male 3-pin XLR
  • Power requirements: 48V phantom power, <2mA (each)
  • Dimensions (each): 55mm (H) x 19mm (Diam.)
  • Weight (each): 37g

*** Included with iRig Pro Quattro I/O Deluxe

Package includes

  • iRig Pro Quattro I/O
    • iRig Pro Quattro I/O interface
    • 1/4" thread adapter
    • Lightning to Mini-DIN connection cable (60cm/23.62")
    • USB-C to Mini-DIN connection cable (60cm/23.62")
    • USB-A to Mini-DIN connection cable (60cm/23.62")
    • 1x 2.5mm TRS male to MIDI female adapter (10cm/3.9")
    • 4 x 1.5V AA Battery
  • iRig Pro Quattro I/O Deluxe
    • iRig Pro Quattro I/O interface
    • 1/4" thread adapter
    • Lightning to Mini-DIN connection cable (60cm/23.62")
    • USB-C to Mini-DIN connection cable (60cm/23.62")
    • USB-A to Mini-DIN connection cable (60cm/23.62")
    • 1x 2.5mm TRS male to MIDI female adapter (10cm/3.9")
    • 4 x 1.5V AA Battery
    • 2 x iRig Mic XY
    • Windshield
    • Power Supply Unit
    • Carrying case

Compatibility

iOS Devices

Made for: iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini, iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE (2nd generation), iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPad Pro 10.5-inch, iPad Pro 12.9-inch (1st and 2nd generation), iPad Pro 9.7-inch, iPad Air (3rd generation), iPad Air 2, iPad Air, iPad mini (5th generation), iPad mini 4, iPad mini 3, iPad mini 2, iPad (5th, 6th, 7th and 8th generation) iPod touch (7th generation), iPod touch (6th generation).

Also compatible with all newer iPhone, iPad and iPod touch models.

Computers

Mac®: Mac OS X 10.6 or later. One free USB port.

Windows®: Windows 10 or later. One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed. Download the iRig ASIO driver here.

Android Devices

Compatible with Android devices running Android 5 or later and with USB digital audio capabilities.

Made for iPhone, iPad, iPod

Legal detail | Warranty

SPECIAL OFFERS8 THIS MONTH
x

We use cookies and other tracking technologies to improve your browsing experience on our site, show personalized content and targeted ads, analyze site traffic, and understand where our audience is coming from. To find out more or to opt-out, please read our Cookie Policy. To learn more, please read our Privacy Policy.

Click below to consent to our use of cookies and other tracking technologies, make granular choices or deny your consent.

 


Loading...